WFCO WF-9560-AD-MBA Power Converter Main Board Assembly — 60 Amp — Auto Detect — Replaces WF-9560 Series
Direct replacement main board assembly for WFCO WF-9560 series 60-amp power centers. Patented Auto Detect technology automatically charges lithium-ion and lead-acid batteries with separate optimized voltage profiles for each. Installs in ~10 minutes — 2 screws, 3 AC cables, 2 DC cables, no rewiring. 1,030W output. Limited lifetime warranty.
⚡ The WFCO Auto Detect Advantage — Patented Technology
The WF-9560-AD-MBA Power Converter Main Board Assembly includes the exclusive, patented Auto Detect technology. This microprocessor-driven technology will recognize lithium-ion and lead-acid battery chemistries and automatically adjust the charging profile to match the battery type.No more buttons. No more switches. An accurately charged battery gives RV owners peace of mind. Eliminating the risk of over- and under-charging, the WF-9560-AD-MBA will maximize your battery life with multi-stage charging and current monitoring in both lead-acid and lithium-ion profiles.The WF-9560-AD-MBA has optimized charging for battery chemistry built in:
- Lead-Acid Batteries: WFCO’s automatic three-stage converter handles every charging need for the RV while extending the battery’s life
- Lithium-Ion Batteries: The multi-stage process ensures a safe operating voltage for all loads, replaces energy in the battery, and assures the lithium-ion cells inside the battery remain balanced
~10-Minute Board Replacement — Upgrade Your WF-9560 Series to Auto Detect
The WFCO WF-9560-AD-MBA is a direct drop-in replacement for the lower power converter section of any WF-9560 series power center, upgrading it to Auto Detect technology without replacing the entire unit and without rewiring. Two screws, three AC cable connections, and two DC cable connections are all that’s required — installation takes approximately 10 minutes.At 60 amps and 1,030 watts, this board delivers the capacity of the WF-9560 series with the intelligence of Auto Detect — separate optimized voltage profiles for lead-acid and lithium-ion batteries, three-stage charging, and multi-stage current monitoring. Backed by a limited lifetime warranty, a step up from the 2-year coverage on standard WFCO boards.
? Auto Detect — Li & Lead-Acid
Patented microprocessor detects battery chemistry and adjusts to separate optimized voltage profiles for each — no buttons or switches
⏱️ ~10-Minute Installation
2 screws, 3 AC cables, 2 DC cables — no rewiring required. Direct replacement for the WF-9560 series lower converter section
⚡ 60 Amp / 1,030W Output
Full 60-amp, 1,030-watt output capacity matches the original WF-9560 series specification
? Limited Lifetime Warranty
Backed by WFCO’s limited lifetime warranty — stronger coverage than the standard 2-year on other WFCO boards
Key Features & Benefits
- Patented Auto Detect Technology: Automatically recognizes lithium-ion or lead-acid battery chemistry and applies separate optimized multi-stage charging profiles for each — no manual switching
- Direct Replacement for WF-9560 Series: Replaces the lower power converter section on any WF-9560 series power center
- ~10-Minute Installation: Only 2 screws, 3 AC cables, and 2 DC cables — no rewiring required
- 60 Amp / 1,030W Output: Full replacement capacity matching the original WF-9560 series board
- Three-Stage Charging (Lead-Acid): Bulk (14.4VDC) below 80%, Absorption (13.6VDC) above 80%, Float (13.2VDC) when fully charged
- Lithium-Ion Charging Profile: Separate optimized voltage range (13.2–14.6VDC / 13.6–14.6VDC) for lithium-ion battery chemistry
- Multi-Stage Current Monitoring: Enhances battery life in both lead-acid and lithium profiles
- Over-Current Protection
- Over-Temperature Protection
- Over-Voltage Protection
- Reverse Polarity Protection
- Limited Lifetime Warranty
Specifications
| Part Number | WF-9560-AD-MBA |
|---|---|
| Brand | WFCO |
| Type | Power Converter Main Board Assembly |
| Auto Detect Technology | Yes — Patented, recognizes Li-Ion & Lead-Acid |
| Replaces | Lower converter section of WF-9560 series power centers |
| Output Current | 60 Amps |
| Output Power | 1,030 Watts |
| Voltage Output — Lead-Acid | 13.2 – 14.4V DC |
| Voltage Output — Lithium-Ion | 13.2 – 14.6VDC / 13.6 – 14.6VDC |
| Input Voltage | 105–130 VAC |
| Converter Type | Three-Stage Converter Charger |
| Dimensions | 7-1/16″ W × 3-7/8″ H × 9-1/2″ D |
| Weight | 5 lbs. |
| Installation Time | ~10 minutes |
| Warranty | Limited Lifetime |
? What’s Included
• (1) WFCO WF-9560-AD-MBA Main Board Assembly
• Mounting hardware (2 screws)
• Installation instructions
? Charging Profiles by Battery Type
Lead-Acid — Three-Stage:
Bulk: 14.4VDC (below 80% capacity)
Absorption: 13.6VDC (above 80% capacity)
Float: 13.2VDC (fully charged)
Lithium-Ion — Optimized Profile:
Voltage range: 13.2 – 14.6VDC / 13.6 – 14.6VDC
Multi-stage process with cell balancing
? Installation Notes
Compatible with: Any WFCO WF-9560 series power center — replaces the lower converter section only.
What you need: 2 screws, 3 AC cable connections, 2 DC cable connections — no rewiring of existing harness.
Estimated time: Approximately 10 minutes.
Dimensions: 7-1/16″ W × 3-7/8″ H × 9-1/2″ D
Consult a qualified RV technician if you are unfamiliar with RV electrical systems before attempting installation.
